14 ENGLISH Thank you very much for purchasing the Sigma EF-530 DG SUPER EO-TTL II Electronic Flash. This product is specifically developed for the C
23 Wireless Flash Exposure Compensation 1. Please set master flash unit to the Wireless Flash Mode. 2.
24 ◆If there are only two slave units, please select the indicator at step 3 ( step 9 and step 10 should be omitted). Wireless Multi Flash Set the
25 Designated Slave Flash If using two or more EF-530 DG Super flash units, you can designate which flash will fire together by using the channel se
15 DESCRIPTION OF THE PARTS EXTERNAL PARTS 1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down 5.Bounce Angl
16 If it still blinks after this procedure, check the battery power. ADJUSTING THE FLASH HEAD Depress the Bounce “Up and Down” Lock and Release Butt
17 2. Turn on the power switch of the flash, the ETTL (TTL) mark will appear on the LCD panel and the flash will start charging. 3. Focus on your
18 5. The manual flash output display will stop blinking and remain displayed after you press the SEL button again. 6. Adjust the focusing by pressi
19 FE LOCK “FE” lock mode allows you to choose and lock the exposure before taking the picture. 1. Set the camera’s exposure mode (“P”, “Tv”, “Av”, “
20MULTI FLASH MODE While the shutter is open, the flash will fire repeatedly. By doing so a series of images of the subject will be exposed in one fr
21 Channel Setting When other people are using Wireless Flash mode near you, your flash may be connected with the other person’s flash and your fla
22 ◆ If the flash ratio is indicated as or , press the + or - button until 1:1 is displayed. 4. Place the Slave Unit at the desired position
Kommentare zu diesen Handbüchern