Sigma DP2x Bedienungsanleitung PDF herunterladen (Seite 65)

FLASH EXPOSURE COMPENSATION

It is possible to compensate the flash output level without changing

the background’s exposure.

Press the button after ejecting the flash by

using the Flash Pop-up lever. (The Allocate

function guide will be displayed on the bottom of

the LCD monitor. The

icon and the orange

compensation value will be displayed in the

upper-left corner of the LCD.)

• It is not possible to set the Flash Exposure Compensation if the

built-in flash is in the inserted position.

Select the desired compensation value by using buttons.

• Exposure compensation can be set in 1/3 stop increments from +3.0

to -3.0 stops.

Press the button again to apply the settings. (The color of the

compensation value will turn from orange to white and the Allocate

function guide will disappear)

CAUTION!!

• The exposure compensation will not disable automatically. After

taking the picture, set the compensation value to ±0.0 by above

procedure.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 122 123

Keine Kommentare

Sigma DP2x Bedienungsanleitung Seite 65