Sigma EF-610 Bedienungsanleitung PDF herunterladen (Seite 4)

DESCRIPTION OF THE PARTS

EXTERNAL

PARTS

1.Flash Head 2.AF Auxiliary Light 3.Bounce Angle; Up and Down

4.Bounce Angle; Right and Left 5.Bounce Lock and Release Button; Up and Down

6.Swivel Lock and Release Button; Right and Left 7.LCD Panel 8.Battery Cover

9.Shoe Ring 10.Shoe 11.Catch Light Panel 12.Wide Panel

CONTROLS

13.MODE Button 14.SEL SELECT Button 15.

+ Increment Button

16.

Decrement Button 17.ZOOM Button 18.TEST Button

19.LIGHT Button 20.Ready Light 21.Power Switch

CAMERA MODELS AND FUNCTIONS

This flash can be used with cameras, which are given below.

Digital SLR, F6, F5, F4 Series, F3 Series(*), F100, F90X/N90S Series, F90/N90 Series, F80 Series,

F75/N75, F70D/N70, U/F65/N65, F60D/N60, F55/N55, F50D/N50, F-801S/N8008S, F-801/N8008,

F601M, F-601/N6006, F501/N2020, F401X, F401S/N4004S, F-401/N4004, F-301, N2000, FA, FE10,

FE-2, FG,

FM10,

New FM2,

FM3,

Nikonos V(*),

Pronea 600i

(*) It is necessary to use adapter for connection.

This instruction book is used for the following lens types. (Please check your lens.)

With Built-in CPU Nikon Lenses D Type Lenses, G Type Lenses, IX Nikor Lenses, Except D

type AF lens (does not include F3AF), Ai-P type lens

Without Built-in CPU Nikon Lenses Ai-S, Ai, Series E lens

ABOUT THE BATTERY

This flash unit uses four “AA” type Alkaline dry cell batteries or Ni-Cad, Ni-MH rechargeable batteries.

Manganese batteries can also be used but as they have a shorter life than Alkaline batteries, we do

not recommend using them. Please replace batteries if it takes more than 30seconds to light the

Ready Lamp.

◆ To assure proper electrical contact, clean the battery terminals before installing the batteries.

◆ NiCad batteries do not have standardized contacts. If you use NiCad batteries, please confirm that

the battery contacts touch the battery compartment properly.

◆ To prevent battery explosion, leakage or overheating, use four new AA batteries of the same type

and brand. Do not mix the type or new and used batteries.

◆ Do not disassemble or short-circuit the batteries, or expose them fire or water; they may explode.

Do not recharge the batteries other than Ni-Cd or Ni-MH rechargeable batteries.

◆ When the flash will not be used for an extended period of time, remove the batteries from the flash

to avoid the possibility of damage from leakage.

◆

Battery performance decreases at low temperatures. Keep batteries insulated when using the flash in cold

weather.

◆ As with any flash, it is recommended you carry spare batteries when on a long trip or when

photographing outdoors in cold weather.

BATTERY LOADING

1. Be sure to set the Power Switch to the off position

then slide the battery cover in the direction of the

arrow to open.

2. Insert four AA size batteries into the battery

chamber. Be sure the + and – ends of the batteries

are aligned according to the diagram in the

chamber.

1 2 3 4 5 6 7 8 9 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Sigma EF-610 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamera Blitze Sigma EF-610